Unable to send gsmsms text

airronairron
Ungraded to latest version 10.1.0. GSM modem needs to send out message. Checked com port on server and ok. can query modem and all is good. try to run test through alerting and says it works but no sms alert to my cell?



checked modem.log and references saying: sms sending failed.



# MODEM Mon Mar 18 11:13:19 2013 info Disconnected from .COM5

# MODEM Mon Mar 18 11:13:47 2013 info sending init string...

# MODEM Mon Mar 18 11:13:47 2013 info sending attention sequence...

# MODEM Mon Mar 18 11:13:48 2013 info reached timeout max wait without response

# MODEM Mon Mar 18 11:13:48 2013 info answer: read []

# MODEM Mon Mar 18 11:13:48 2013 info answer: `'

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `OK'

# MODEM Mon Mar 18 11:13:48 2013 info disabling echo

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [ATE0^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `ATE0^MOK'

# MODEM Mon Mar 18 11:13:48 2013 info Ok connected

# MODEM Mon Mar 18 11:13:48 2013 info Reading messages on Sim card

# MODEM Mon Mar 18 11:13:48 2013 info PIN status query

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [^M+CPIN: READY^M^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `+CPIN: READY^M^MOK'

# MODEM Mon Mar 18 11:13:48 2013 info Already registered on network. Ready to send.

# MODEM Mon Mar 18 11:13:48 2013 info testing support for command [+CPMS]

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [^M+CPMS: ("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR")^M^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `+CPMS: ("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR")^M^MOK'

# MODEM Mon Mar 18 11:13:48 2013 info command [+CPMS] is supported

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [^M+CPMS: 0,30,0,0,0,30^M^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `+CPMS: 0,30,0,0,0,30^M^MOK'

# MODEM Mon Mar 18 11:13:48 2013 info setting mode to [pdu]

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `OK'

# MODEM Mon Mar 18 11:13:48 2013 info answer: read [^MOK^M]

# MODEM Mon Mar 18 11:13:48 2013 info answer: `OK'

# MODEM Mon Mar 18 11:13:49 2013 info reached timeout max wait without response

# MODEM Mon Mar 18 11:13:49 2013 info answer: read []

# MODEM Mon Mar 18 11:13:49 2013 info answer: `'

# MODEM Mon Mar 18 11:13:49 2013 info found 0 messages on SIM. Reading.

# MODEM Mon Mar 18 11:13:50 2013 info Disconnected from .COM5

Comments

  • AdministratorAdministrator
    What kind of modem are you using? Can you try using a different sim card and see if it makes a difference?
  • airronairron
    We purchased a zoom 4595 from you. When i turn off the serverscheck service. start the zoom gui I can send a test message to my cell using the zoom interface. nothing wrong with sim chip or zoom gsm modem.
  • AdministratorAdministrator
    is the zoom app running or not when the serverscheck service is running?



    if not, then run the web server in debug mode and send a test sms. Copy paste the debug output as a reply
  • airronairron
    Zoom app is not running. Only use that to tell me if the zoom modem is working with windows server.





    # Tue Mar 19 09:09:55 2013 Reading conf file completed

    # Tue Mar 19 09:09:55 2013 Importing current status of each monitor

    # Tue Mar 19 09:09:55 2013 End importing current status of each monitor

    +++

    AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0



    ATE0



    AT+CSCA?



    # Tue Mar 19 09:10:38 2013 Service center number is: +CSCA: "+12063130004",145 (configured: )

    AT+CMGF=0



    # Tue Mar 19 09:10:38 2013 Sending SMS to 925437xxxx

    AT+CPIN?



    ATE1



    AT+CMGF=0



    AT+CMGS=48



    0011000A8129457319590000A728D4F29C0E9A36A7A01648A180BEEF6579990C12E715D3B2DC5E96CF87E8F278ED1ABFDB

    # GSM Tue Mar 19 09:10:42 2013 Send result : 1

    # Tue Mar 19 09:10:42 2013 SMS message was succesfully sent to 925437xxxx

    # Tue Mar 19 09:11:25 2013 Reading configuration file - last was 1363709395

    # Tue Mar 19 09:11:25 2013 Reading conf file completed

    # Tue Mar 19 09:11:25 2013 Importing current status of each monitor

    # Tue Mar 19 09:11:25 2013 End importing current status of each monitor

    # Tue Mar 19 09:12:55 2013 Reading configuration file - last was 1363709485

    # Tue Mar 19 09:12:55 2013 Reading conf file completed

    # Tue Mar 19 09:12:55 2013 Importing current status of each monitor

    # Tue Mar 19 09:12:55 2013 End importing current status of each monitor

    # Tue Mar 19 09:13:20 2013 Logs from 1363676400:Tue Mar 19 00:00:00 2013 to 1363762800:Wed Mar 20 00:00:00 2013

    # Tue Mar 19 09:13:20 2013 Scanning log: alerts-2013-3-19
  • AdministratorAdministrator
    The modem replied that it could send the SMS. You didn't receive it? Try putting your phone number in the international format: +1925437xxxx
  • airronairron
    No, the only I get are thru the zoom application doing it manually. once i enable the serverscheck service, then using the gsmmodem tester thru serverscheck, it says it sent out but nothing is recieved? I have tried my cell as well as one of my co-workers just to ensure that it is not my carrier.



    what to try? could it be a conf file somewhere that is wrong?
  • AdministratorAdministrator
    The gsmmodem tester app has been discontinued and is no longer supported.
  • airronairron
    Ok, I just sent the screenshot of gsm modem to the email as I cannot paste the screen shot here.



    Thanks, Ron
  • AdministratorAdministrator
    You can post the screenshot here by hosting it from a site and pasting it's URL using picture button.



    So, have you already tried putting your number in the international format? Did it make any difference at all?
  • airronairron
    Yes, I tried the intl format which is a + in front and still it says the gsm text was sent out. I just attached the screen shot to word doc. Sent it to you in email attachment.
  • airronairron
    So why can't the Sms gsm modem messages be sent thru serverscheck. it was working in previous version.
  • AdministratorAdministrator
    if it was working in 10.0 then it should work in 10.1



    nothing changed in that component between version 10.0 and 10.1



    if you install it on another system and try it, does it work then?
  • airronairron
    No, previously we were using 9.7 then went to 10.1.0

    Now GSM - SMS messaging no longer works?



    Could it be that your new portal is conflicting with my gsm modem sending out sms messages?



    I did purchase (3) new temp sensor gateways and was attempting to configure them. I did not understand how to connect them to gsm modem to send out gsm text messages. I think I accidently enabled the sms messages that cost money. But I do not want that service. I already can send out gsm using my modem. Could that be the cause? How to correct?



    Here is my error.log:

    # Starting up app

    # Tue Mar 19 09:09:26 2013 file 38.216.148.111.scanc cleaned

    # Tue Mar 19 09:09:26 2013 file 38.216.149.32.scanc cleaned

    # Tue Mar 19 09:09:26 2013 file 38.216.149.81.scanc cleaned

    # Tue Mar 19 09:09:26 2013 file events.log cleaned

    # Tue Mar 19 09:09:26 2013 file master.log cleaned

    # Tue Mar 19 09:09:26 2013 file modem.log cleaned

    # Tue Mar 19 09:09:26 2013 file test.log cleaned

    #

    # ServersCheck Web Server

    # BUSINESS500 Edition

    # ServersCheck BUSINESS500 Edition - version 10.1.0

    #

    # Number of monitors allowed: 500

    #

    # Installed on - SERVERSCHECK2

    #

    # Loading language file: EN.lang

    # version 10.1.0

    #

    # ServersCheck MSP license loaded

    #

    # (c) Copyright 2003-2013 - ServersCheck BVBA

    # www.serverscheck.com

    #

    #

    #

    #

    #

    # Start: Tue Mar 19 09:09:26 2013 - End: Tue Mar 19 09:09:26 2013

    #

    # Configuration server ready, serving on port "1272"...

    #

    #

    # Tue Mar 19 09:09:55 2013 Reading configuration file - last was

    # Tue Mar 19 09:09:55 2013 Reading conf file completed

    # Tue Mar 19 09:09:55 2013 Importing current status of each monitor

    # Tue Mar 19 09:09:55 2013 End importing current status of each monitor

    +++

    AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0



    ATE0



    AT+CSCA?



    # Tue Mar 19 09:10:38 2013 Service center number is: +CSCA: "+12063130004",145 (configured: )

    AT+CMGF=0



    # Tue Mar 19 09:10:38 2013 Sending SMS to 9254379195

    AT+CPIN?



    ATE1



    AT+CMGF=0



    AT+CMGS=48



    0011000A8129457319590000A728D4F29C0E9A36A7A01648A180BEEF6579990C12E715D3B2DC5E96CF87E8F278ED1ABFDB

    # GSM Tue Mar 19 09:10:42 2013 Send result : 1

    # Tue Mar 19 09:10:42 2013 SMS message was succesfully sent to 9254379195

    # Tue Mar 19 09:11:25 2013 Reading configuration file - last was 1363709395

    # Tue Mar 19 09:11:25 2013 Reading conf file completed

    # Tue Mar 19 09:11:25 2013 Importing current status of each monitor

    # Tue Mar 19 09:11:25 2013 End importing current status of each monitor

    # Tue Mar 19 09:12:55 2013 Reading configuration file - last was 1363709485

    # Tue Mar 19 09:12:55 2013 Reading conf file completed

    # Tue Mar 19 09:12:55 2013 Importing current status of each monitor

    # Tue Mar 19 09:12:55 2013 End importing current status of each monitor

    # Tue Mar 19 09:13:20 2013 Logs from 1363676400:Tue Mar 19 00:00:00 2013 to 1363762800:Wed Mar 20 00:00:00 2013

    # Tue Mar 19 09:13:20 2013 Scanning log: alerts-2013-3-19
  • AdministratorAdministrator
    Run the alerting module in debug mode and simulate a failure that should result in a SMS being sent.
  • airronairron
    does serverscheck monitoring service need to be off. just double click the s-alerts.exe? how to redirect to txt?
  • AdministratorAdministrator
    Yes, the monitoring service should be turned off.

    On the command prompt, redirect to ServersCheck directory then type s-alerts.exe > debug.txt
  • airronairron
    Ok, I got a sms alert after unplugging the power for one of the power sensors. now I am attempting to configure one the new orange temp & gateway for our remote offices. when i click on the enable sms alerts, it attempts to get me to go to some portal where they charge for sms alerts. how do I configure these temp sensors to use my gsm sms alerts to notify if there are issues? do I turn off the sms on the new temp gw? how do I get it to send to my gsm modem instead?
  • AdministratorAdministrator
    On the sensorgateways SMS can only be sent through our SMS service, not a GSM modem



    See http://www.serverscheck.com/sensors/alerts_sms.asp

    for more info
This discussion has been closed.