Linux access to the sensor readings

Dear all
I am trying to access to the sensors' reading through snmp from a linux machine.
I enabled on the sensorcheck interface the snmp protocol and I managed to connect to it from my linux server:

[root@fotcluster2 ~]# snmpwalk -v2c -cpublic 10.208.130.18
SNMPv2-MIB::sysDescr.0 = STRING: Temperature & Sensor Gateway
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.17095
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (24358512) 2 days, 19:39:45.12
SNMPv2-MIB::sysContact.0 = STRING: http://www.serverscheck.com
SNMPv2-MIB::sysName.0 = STRING: SensorGateway
SNMPv2-MIB::sysLocation.0 = STRING: Data Center

However I am unable to find the reading of the sensors.
I've tried also to use the mib for the specific sensor but the results is rather puzzling to me:

[root@fotcluster2 ~]# snmpwalk -MALL -v2c -cpublic 10.208.130.18
No log handling enabled - turning on stderr logging
Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none)
Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none)
Cannot find module (UCD-DISKIO-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (MTA-MIB): At line 0 in (none)
Cannot find module (NETWORK-SERVICES-MIB): At line 0 in (none)
Cannot find module (SCTP-MIB): At line 0 in (none)
Cannot find module (RMON-MIB): At line 0 in (none)
Cannot find module (EtherLike-MIB): At line 0 in (none)
Cannot find module (LM-SENSORS-MIB): At line 0 in (none)
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none)
Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none)
Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (IPV6-ICMP-MIB): At line 0 in (none)
Cannot find module (IPV6-MIB): At line 0 in (none)
Cannot find module (IPV6-TCP-MIB): At line 0 in (none)
Cannot find module (IPV6-UDP-MIB): At line 0 in (none)
Cannot find module (IP-FORWARD-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-PASS-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
Cannot find module (NET-SNMP-VACM-MIB): At line 0 in (none)
iso.3.6.1.2.1.1.1.0 = STRING: "Temperature & Sensor Gateway"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.17095
iso.3.6.1.2.1.1.3.0 = Timeticks: (24377211) 2 days, 19:42:52.11
iso.3.6.1.2.1.1.4.0 = STRING: "http://www.serverscheck.com"
iso.3.6.1.2.1.1.5.0 = STRING: "SensorGateway"
iso.3.6.1.2.1.1.6.0 = STRING: "Data Center"


Now the question is: can the reading be accessed in Linux without having to setup a trap (and hence a server who receives the trap)?
Regards
Antonio

Comments

  • adminadmin
    Hi antonio,

    have you tried doing another walk and have it start with ".1.3.6" I can give you specific OID's if you need it or you can do an SNMP walk using our software on a windows platform and then list the OID's you want to access through your linux system and create scripts of SNMP get to access the specific values you need.
Sign In or Register to comment.