email alert

2»

Comments

  • AdministratorAdministrator
    What Exchange version are you using 2013?



    Instead of Silver Peak you could use this free open source tool:

    http://sourceforge.net/projects/emailrelay/


  • BernBern
    Exchange 2013

    We do not want the silver peak to be the reason it works.

    I would not be allowed to use a n open source app without jumping through lots of security team hoops.



    Please compare you code. You must have changed something, otherwise the old version would not work too. As it works and the new ones do not there must have been a change.


  • BernBern
    Hi there



    is there any update on this?





    thanks



    B
  • AdministratorAdministrator
    There is no further development planned on this issue at this stage based on above comments.
  • BernBern
    who can I complain to via a valid incident ticket?
  • AdministratorAdministrator
    To open an incident ticket see our premium support plans at https://premium.serverscheck.com/plans.asp



    Like stated it was tested on Exchange 2013 with the latest firmware (5.11) which has a higher window size and confirmed working on a non authentication based configuration.



    If that still doesn't work then the alternative is to use the free relay server for which we sent the link.
  • AdministratorAdministrator
    Firmware 6 is scheduled for release in the next 2 weeks.



    This will include a SYN window size similar as firmware 3.



    Due to memory limitations in older Sensorgateways, the firmware will only be available for devices purchased in 2013 or later.
  • BernBern
    fantastic matey

    all of mine are 2013 onwards :)

    if not I am happy to buy new ones as this fixes my issue



    nudge me when its available for beta testing



    thank you



    B
  • BernBern
    Hi there

    any news on the release date?

    I am free to beta test



    thanks



    B
  • AdministratorAdministrator
    Bern,



    here is the latest beta build of firmware 6:

    http://downloads.serverscheck.com/sensors/FACTORY_HWver5_Fw_Beta_6.00b.bin
  • BernBern


    Hi there

    I have installed this beta v6 software.

    For the install process only there were 2 successes and 2 failure

    I will try a few more devices but here is the first impressions

    so far it killed 2 devices (i had to reset to factory) SGW2013020507038 012

    the other is remote so i have to wait until its reset tomorrow

    The first device does have a POE issue and was connected to one of your power cables but just got stuck at rebooting. I had to factory reset it to 3.02 it then worked on 3.02 and 3.06 etc

    It worked on two device and the email was received on a network that did not work before :)



    identified issues so far

    in sensor status (tested IE and chrome)

    (1 temps display 0 then on a refresh they are back to normal

    they send alerts This will cause havoc

    (2) trigger options only option is disable and this does nothing

    (3) set output state to = no options

    (4) the sensor page does not always render well in chrome
  • AdministratorAdministrator
    it is a beta version and there are known bugs. it was shared with you only for the purpose of testing exchange.



    The firmware is only for 2014 devices onward, not 2013. My mistake, I apologize for that. This is due to memory limitations in the earlier models.
  • BernBern
    no problems

    just passing on the info
  • BernBern
    other than looking at the back of the devices, does the serial number / build date appear in the MIB data?

    any query we can run to see which ones will work



    B
  • BernBern
    Any date for the realise of v6

    The new flood cable only wirks in. Newer versions

    Please can you reply as it's been nearly a month
  • AdministratorAdministrator
    the flooding sensor works on our current official firmware 5.11 , as for the release date of version 6.0 it is still in progress as we found new bugs that needs to be addressed.
  • BernBern
    Hi there



    any news on the release date for for v6?
  • AdministratorAdministrator
    The availability of firmware 6 will be made available through our social media channels (Facebook & Twitter).



    It is currently in beta testing and not released yet. We don't publish ETA for future firmware releases.
  • BernBern
    Thank you

    As I helped you test the Beta for v6 recently I was just asking for an update. Especially as I identified the issue the firmware is fixing

    Please nudge me when You need retesting
Sign In or Register to comment.