Base module wired - does not get dhcp

Humidity sensor doesHumidity sensor does
Hello, I am trying to switch the base module to dhcp.
The module does not gets dhcp and reverses to the static ip
The network dhcp server is working fine.

Comments

  • AdministratorAdministrator
    make sure to always mention your firmware version so that other users may assist you
  • Humidity sensor doesHumidity sensor does
    Hardware Version : Release 5.0
    Firmware Version : Release 3.21
    Build Date : Nov 24 2017
  • AdministratorAdministrator
    Latest firmware release is 8.0 - see download page in our support section.
  • Humidity sensor doesHumidity sensor does
    we installed latest firmwware. Unit still does not get dhcp
  • AdministratorAdministrator
    Please check log of your DHCP server or use a manual IP
  • Humidity sensor doesHumidity sensor does
    with manual ip it works
    the problem is that DHCP does not work
  • Humidity sensor doesHumidity sensor does
    NO DHCP LOG ENTRIES AT ALL
  • AdministratorAdministrator
    You may try with a different DHCP server. If that doesn't work then something is preventing it from registering onto your network. Use a fixed IP instead.
  • Humidity sensor doesHumidity sensor does
    But the proble is that the customer might want dhcp to operate. What are we going to tell them?
  • StreliziaStrelizia
    Have you tried plugging the base-unit to other router? possible problem is that your router doesn't give out DHCP to the base-unit.
Sign In or Register to comment.