Re: Sensor

edited July 2008 in InfraSensing Sensors
One of my client have the following concerns below such as:

1.The distance of sensor from the pc would be very far ( distance of 100 to 500 meter) any additional equipment needed.

2. the installation would be at least 5 sensor , is your software capable of monitoring multiple sensor

3. could you provide be a layout or schematic diagram for multiple sensor


  • AdministratorAdministrator
    Ethernet enabled sensors would be the solution for your clients need. Each sensor will get its own IP address.

    The software is installed on a central system (running Windows) and connects over TCP/IP (port 3001) to each sensor.

    As long as you have tcp/ip connection to the different locations from the central installation, then there is no problem.

    We have customers having deployed sensors where the distance between sensor and software is more than 10.000 km so 500 meters is not that far.

This discussion has been closed.